Coming soon.
We are not there right yet but we will be bringing you a very simple step by step guide for all things vinyl.
Tutorials on sizing up and getting it right first time.
Tutorials on how to prep, apply and avoid any issues along the way.
However if you are looking for a simple application guide here is our step by step process.
Step by step.
1. Do not apply when it is drastically hot or cold as this will affect the performance of the adhesive and vinyl. Surface should be fine to touch, ice cold or hot to touch will affect the sticker contact.
2. Thoroughly clean the surface to remove all dirt, once clean completely dry the surface. Avoid using cleaning solutions which apply a film such as ‘wash & wax’ when cleaning.
3. Prepare the sticker for application by firmly rubbing across the sticker. This ensures the vinyl is stuck to the transfer tape and removes any air bubbles which may have occurred in postage.
4. Peel off the white side of the sticker, you should just be left with the clear side and the vinyl still stuck to the clear side.
5. Place the decal onto the surface and rub it in place firmly, we recommend a squeegee.
6. Slowly peel the backing paper off at a 45 degree angle. If you find the sticker is still sticking to the transfer reapply and add a suitable amount of pressure.
7. If you choose to wipe the sticker after applying use a clean microfibre cloth and do not apply too much pressure as this can peel the sticker if it has not settled.
